Pular para o conteúdo principal

Alterações no passo #6

Edição por Chris Hoffman

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* red] Removeblack] Remove the two Phillips screws from the optical drive side of the computer.
[* red] Two 5.2 mm Phillips #000, with Shank (2.3mm dia. x 3.5 mm len.) (Head: 3.2 mm. dia. x .5mm thick)
[* red] Removeblack] Remove the two Phillips screws from the optical drive side of the computer.
[* red] Two 5.2 mm Phillips #000, with Shank (2.3mm dia. x 3.5 mm len.) (Head: 3.2 mm. dia. x .5mm thick)
[* icon_note] It is not necessary to remove the similar screws on the other side of the computer.