Alterações no passo nº 1
Edição por Chris Hoffman —
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Remove the following 3 screws: | |
| - | [* red] One 11 mm Phillips in the middle of the case. |
| - | [* orange] Two 14.5 mm Phillips. |
| + | [* red] One 11 mm Phillips in the middle of the case. (Head: 5mm dia. x .75mm thick) |
| + | [* orange] Two 14.5 mm Phillips (Head: 5mm dia. x .75mm thick) |
| [* icon_note] If the screws stick in the case, you can use a magnetized screwdriver to draw them out. | |
| [* icon_reminder] The shorter of the three screws goes in the middle. |