Alterações no passo nº 3
Edição por Daniel Anderson —
Edição aprovada por Daniel Anderson
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Remove the 1/4" Phillips #02 screw between the fan and the motor, located at the bottom of the fan. | |
| - | [* icon_note] You may need to rotate the fan to find the screw. |
| + | [* icon_note] You may need to rotate the fan blade to find the screw. |
| [* icon_note] Upon reassembly, make sure that the notched part of the motor axle (blue square) lines up with the screw hole on the fan blade. |