Ir para o conteúdo principal

Alterações no passo #15

Edição por Jeff Suovanen

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Continue derouting the cellular antenna cable from the second and third logic board clips.
[* black] Use the pointed tip of a spudger to gently pry the cellular antenna cable from the middle logic board clip.
- [* icon_caution] Do not pull the cable out of the center clip, as it will tear easily.
+ [* icon_caution] Don't try to remove it by pulling on the cable, as it will tear easily.
[* icon_reminder] In order for the cable to reach its socket on the logic board, you must route it above the logic board and underneath the audio control flex cable, as shown in the first photo.

Imagem 1

Versão Antiga

Nova Versão