Conserte seus objetos Comunidade Loja

Alterações no passo nº 5

Edição por Sam Goldheart —

Edição aprovada por Sam Goldheart

Antes
Depois
Sem alteração

Linhas do passo

-[* black] The gap between the plastic bottom and aluminum frame is too thin even for our opening picks—so instead we put our [product|IF145-310-1|Apple Watch Opening tool|new_window=true] to work, to get some prying purchase.
+[* black] The gap between the plastic bottom and aluminum frame is too thin even for our opening picks—so instead we put our [product|IF145-310-1|Apple Watch Opening tool|new_window=true] to work, hoping for some prying purchase.
[* black] Once we get enough of a gap opened up, we sheath our knife and switch to plastic. Plastic [product|IF145-123|Opening Picks|new_window=true], that is.
-[* icon_note] The entire lower panel is glued in place, so we need some iOpener reapplication while prying.
+[* icon_note] The entire lower panel is glued in place, so we make a heat-and-pry-and-repeat parfait. Delicious. But arduous for repair.