Alterações no passo nº 1
Edição por Zach Emard —
Edição aprovada por Zach Emard
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_note] Make sure the fan is unplugged |
|---|---|
| - | [* icon_caution] Soldering irons are hot! |
| - | [* red] Unscrew the 6 screws on the front of the fan |
| - | [* black] Remove the face plate |
| - | [* black] Flip the fan and repeat for the 6 screws on the back |
| + | [* icon_caution] Make sure the fan is unplugged. |
| + | [* red] Unscrew the 6 screws on the front of the fan. |
| + | [* black] Remove the face plate. |
| + | [* black] Flip the fan and repeat for the 6 screws on the back. They are in the same position as the front. |