Alterações no passo nº 8
Edição por Chuy Mercado —
Edição aprovada por Chuy Mercado
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Fold the sides of the cover over the board and cushion. |
|---|---|
| - | [* black] pull on the sides of the cover to ensure it is spread evenly. |
| - | [* black] Starting on the sides, use the staple gun to staple loose fabric, stapling about every inch. |
| - | [* black] Once all the sides are stapled down, fold down a corner at a time and staple it down. |
| + | [* black] Fold the sides of the cover over the board and cushion keeping them as close to the center of the board as possible. |
| + | [* black] Select a side to start on. |
| + | [* black] With the staple gun, staple the end of the cushion cover you are holding into the board. |
| + | [* black] Rotate the board and staple down the other side. |
| + | [* black] Continue to staple down the sides, placing staples about 1 inch apart. |
| + | [* black] Fold the corners in and staple them onto the board. |