Alterações no passo nº 1
Edição por Daniel Sanchez —
Edição aprovada por Daniel Sanchez
- Antes
- Depois
- Sem alteração
Linhas do passo
- | [* black] Pump the plunger up and down for a solid 30 seconds using a rapid motion. |
---|---|
+ | [* black] Begin by filling the sink halfway full with water. |
+ | [* black] Pump the plunger rapidly for 30 seconds. |
[* icon_caution] Do NOT break seal between plunger and drain. | |
- | [* black] Repeat |
- | [* icon_note] Wait 20 |
+ | [* black] Repeat this process 4 to 6 times. |
+ | [* icon_note] Wait 20 min before proceeding to the next step. This will allow some debris to flow down the pipes. |