Alterações no passo nº 11
Edição por Stephen Nelson —
Edição aprovada por Stephen Nelson
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] allow the mortar to set for 24 hours. |
|---|---|
| + | [* black] Mix the grout as per manufacturer's instructions. a good mixture will have a thick, pasty feel to it. |
| + | [* black] Remove any tile spacers you may have used. |
| + | [* black] Utilize a trowel to spread the grout along the tile's joints, then diagonally along the joints. |
| + | [* black] Allow the grout to dry for 3 hours. |
| + | [* black] use a sponge and water to remove extra grout. The grout should not be level with the tile, instead keep the grout beneath the level of the tile. |