Ir para o conteúdo principal

Alterações no passo #5

Edição por Alexander Kim

Edição aprovada por Alexander Kim

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Once the screws have been removed, lift the top half of the gun off.
[* icon_note] Notice, the gray colored piece must be removed first in order for the larger half to be removed.
[* black] Take care and try not to lose any smaller pieces as you open it up.
[* black] 12 ScrewsPhilips head screws: Head Dia.= 4.3mm, Thread Pitch= 1mm, Screw Length= 8mm
[* black] 12 ScrewsPhilips head screws: Head Dia.= 4.3mm, Thread Pitch= 1mm, Screw Length= 8mm
[* black] Locking tab for attachments.
[* black] At this point, you are able to inspect the Nerf blaster's internals!