Alterações no passo nº 6
Edição por Kristen Gismondi —
Edição aprovada por Kristen Gismondi
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Place the camera on the surface with the front side facing down. Use the spudger to open the film strip locking mechanism and remove strip. |
|---|---|
| - | [* black] Hold down on the camera's metal casing with one hand. Using your other hand, remove the back case from the rest of the camera so the film strip separates. |
| + | [* red] Place the camera on a flat surface with the front side facing down. |
| + | [* black] Use the spudger to flip up the retaining flap and slide the ribbon cable out of the connector. |
| + | [* black] Hold down on the camera's metal casing with one hand. Using your other hand, remove the back case from the rest of the camera. |