Ir para o conteúdo principal

Alterações no passo #3

Edição por Jeremy

Edição recusada por Andrew Optimus Goldheart

Sem alteração

Linhas de Passo

[* black] Pull up on the exposed clear plastic tab to peel the battery off the adhesive securing it to the iPhone.
[* icon_caution] Depending on the strength of the adhesive holding the battery down, the adhesive's strength may exceed the strength of the plastic pull-tab. If so, you'll need to work the plastic spudger around the battery to release the adhesive. Too much pressure exerted at any one point could short the battery internally rendering it useless.
-[* black] Remove the battery.
+[* black] Remove the battery. Use a 2" putty knife on tab side if you have to.
[* icon_note] Do not remove the plastic tab from the iPhone.