Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #4

Edição por car ramrod

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* blue] Simultaneously pushWhile pulling the graygrey tab gently towardtowards the memory card slot andback of the camera, lift up the black section of the battery covercover up.
[* blue] Simultaneously pushWhile pulling the graygrey tab gently towardtowards the memory card slot andback of the camera, lift up the black section of the battery covercover up.
[* red] Use the Phillips head screwdriver, rotating counter clockwise to remove the two screws on either side of the battery slots and set them aside.
[* black] When reassembling the camera, make sure that the grey part of the battery cover is underneath the two halves of the camera casing. The black cover should fit over the empty space where the batteries go and the holes for the screws should line up with the holes in the casing. You may need to pull the green part of the inside of the camera away from the grey tab in order to move the battery cover into place.