Histórico do passo nº 4 do guia Samsung SGH-X495 Backplate Replacement

Alterações no passo nº 4

Edição por Matthew Hove — 14 de fev de 2011

: Antes
: Depois
: Sem alteração

Linhas do passo

-	[* black] Begin by inserting the pry tool at the bottom of the phone near the charging jack. There is a catch tab on either side and two on the top. Start at the bottom and slide the tool up prying the silver front out and away from the white backing. The silver front portion has a tab that goes inward and through the white square slot shown.
+	[* black] Begin by inserting the pry tool at the bottom of the phone near the charging jack. There is a catch tab on either side and two on the top. Start at the bottom and slide the tool up prying the silver front out and away from the white backing. The silver front portion has a tab that goes inward and through the white square slot shown. Loose the side catch tabs before moving on to the top two.

[* black] Begin by inserting the pry tool at the bottom of the phone near the charging jack. There is a catch tab on either side and two on the top. Start at the bottom and slide the tool up prying the silver front out and away from the white backing. The silver front portion has a tab that goes inward and through the white square slot shown.