Alterações no passo nº 2
Edição por kaitlin —
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Now remove |
|---|---|
| - | [* yellow] Then remove the |
| + | [* red] Now remove (4) 2.9mm screws from the L-shaped circuit board. They are marked with red circles in the slide. |
| + | [* yellow] Then remove the (3) wire strips connected to the camera so you can pull off the L-shaped circuit board. They are marked with yellow boxes in the slide. |
| [* orange] Next remove the one wire strip that is connected to the bottom of the circuit board. |