Ir para o conteúdo principal

Alterações no passo nº 2

Edição por coleman leach

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas do passo

-[* red] Remove 4 2.9mm screws from the L-shaped circuit board.
-[* yellow] Remove 3 connecting wire strips to pull off the L-shaped circuit board.
-[* orange] Remove 1 wire strip that is connected to the bottom of the circuit board.
+[* red] Remove four 2.9mm screws from the L-shaped circuit board.
+[* yellow] Remove three connecting wire strips to pull off the L-shaped circuit board.
+[* orange] Remove one wire strip that is connected to the bottom of the circuit board.