Ir para o conteúdo principal

Alterações no passo #4

Edição por Lauren

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* red] Now you must remove the (2) 4.5mm screws from the top of the camera that are pointed out with red circles.
-[* yellow] Then remove the (1) 4.5 mm screw from the disk side of the camera located next to the lens. This screw is pointed out with a yellow circle.
+[* red] Remove the (2) 4.5mm screws from the top of the camera that are pointed out with red circles.
+[* yellow] Remove the (1) 4.5 mm screw from the disk side of the camera located next to the lens. This screw is pointed out with a yellow circle.