Ir para o conteúdo principal

Alterações no passo #4

Edição por Derek Carpenter

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* yellow] Now remove two 4.5mm screws from the top of the camera.
-[* green] Then remove one 4.5 mm screw from the disk side of the camera located next to the lens
+[* yellow] Now you must remove the two 4.5mm screws from the top of the camera that are pointed out with yellow circles.
+[* green] Then remove the one 4.5 mm screw from the disk side of the camera located next to the lens. This screw is pointed out with a teal circle.