Pular para o conteúdo principal

Alterações no passo #5

Edição por Angelo

Edição aprovada por Angelo

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_noteicon_caution] Do not completely remove the main circuit board from the camera. A soldered ribbon cable still attaches the board to the camera. Complete removal would break the soldering points.
[* icon_noteicon_caution] Do not completely remove the main circuit board from the camera. A soldered ribbon cable still attaches the board to the camera. Complete removal would break the soldering points.
[* black] In a hinge-like motion, gently lift the bottom of the main circuit board, which is the side without the soldering points.
[* red] Gently detach the white ribbon cable from the underside of the main circuit board.