Pular para o conteúdo principal

Alterações no passo #5

Edição por Angelo

Edição aprovada por Angelo

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_cautionicon_note] Do not completely liftremove the main circuit board offfrom the camera. The circuit board is attached to the top of the camera by aA soldered ribbon cable. Liftingcable still attaches the main circuit board offto the camera willcamera. Complete removal would break thesethe soldering points.
[* black] GentlyIn a hinge-like motion, gently lift the bottom of the main circuit board, which is the side without the soldered attachment points, like a hingesoldering points.
[* red] LocateGently detach the white ribbon cable attached tofrom the underside of the main circuit board.
[* red] Gently remove the white ribbon cable from the connector.
[* icon_cautionicon_note] Do not completely liftremove the main circuit board offfrom the camera. The circuit board is attached to the top of the camera by aA soldered ribbon cable. Liftingcable still attaches the main circuit board offto the camera willcamera. Complete removal would break thesethe soldering points.
[* black] GentlyIn a hinge-like motion, gently lift the bottom of the main circuit board, which is the side without the soldered attachment points, like a hingesoldering points.
[* red] LocateGently detach the white ribbon cable attached tofrom the underside of the main circuit board.
[* red] Gently remove the white ribbon cable from the connector.