Pular para o conteúdo principal

Alterações no passo #5

Edição por Justin

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] Do not completely lift the circuit board off the camera. The circuit board is attached to the top of the camera by a soldered ribbon cable. Lifting the main circuit board off the camera will break these soldering points.
[* black] Gently lift the bottom of the main circuit board, the side without the soldered attachment points, like a hinge.
[* blackred] Locate the white ribbon cable attached to the underside of the main circuit board.
[* blackred] Locate the white ribbon cable attached to the underside of the main circuit board.
[* red] Gently remove the white ribbon cable from the connector.