Pular para o conteúdo principal

Alterações no passo #5

Edição por Ross Bryan

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* icon_caution] Do not completely lift the circuit board off of the camera. The circuit board is attached to the top of the camera by a soldered ribbon cable. Lifting the main circuit board off of the camera will break these soldering points.
[* black] Gently lift the bottom of the main circuit board, without the soldered attachment points, like a hinge and locate the white ribbon cable attached to the underside of the main circuit board.
[* red] Gently remove the white ribbon cable from the connector.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado