Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #2

Edição por Walter Galan

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Insert the tip of an unrolled paper clip into the small hole located on the side of the optical drive.
[* icon_note] The tray will partially pop out of the laptop.
[* black] Firmly pull the drive straight away from the laptop.
[* icon_caution] While pulling the drive out, be careful not to bend the sliding rails on both sides of the optical drive.
[* black] At this point you can remove the entire optical drive assemblydrive, or you can continue to disassemble the optical drive itselfassembly.
[* black] At this point you can remove the entire optical drive assemblydrive, or you can continue to disassemble the optical drive itselfassembly.