Pular para o conteúdo principal

Alterações no passo #2

Edição por Robert Hobson

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] The speakers are connected to the circuit board via two power cables.
[* black
red] Remove the two speaker cables from the circuit board by pinching the leadsplastic connectors and firmly pulling straight up.
[* icon_caution] Pull on the plastic part of the connector, even though it may seem easiest to pull on the wires.
[* icon_caution] DO NOT remove speakers yet - they are still attached.
[* black] The speakers are connected to the circuit board via two power cables.
[* black
red] Remove the two speaker cables from the circuit board by pinching the leadsplastic connectors and firmly pulling straight up.
[* icon_caution] Pull on the plastic part of the connector, even though it may seem easiest to pull on the wires.
[* icon_caution] DO NOT remove speakers yet - they are still attached.