Ir para o conteúdo principal

Alterações no passo #1

Edição por Robert Manno

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Remove the 5 screws on the outside of the camera. One is located under the rubber USB flap.
+[* black] Remove the 2 screws(2.41mm long) on the side of the camera next to the LCD screen.
+[* black] Remove the 2 screws(4.08mm) on the other side. One is located under the rubber USB flap.
+[* black] Remove the last screw(2.59mm) located on the bottom of the camera.
[* black] Slowly pull the back cover of the camera.