Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Alterações no passo #6

Edição por Dante Mazzanti

Edição aprovada de Dante Mazzanti

Sem alteração

Linhas de Passo

[* black] Slide the pick down along the edge of the iPad, releasing the adhesive as you go until you reach the top left hand corner of the iPad.
[* black] If there is still a considerable amount of resistance when sliding the opening pick, reheat and reapply the iOpener once again to soften the adhesive.
[* icon_caution] Be careful to not let the opening pick slide between the fused LCD and front panel, doing so could damage the screen.
[* icon_note] A good way to avoid this is to never insert the opening pick more than a quarter inch into the iPad.