Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por Andrew Bookholt

Aguardando aprovação

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Insert wisdom hereRemove the following 3 screws:
[* red] Two 1.5 mm Phillips #00 screws, one on either side of the dock connector.
[* orange] One 2.4 mm Phillips #00 screw near the ribbon cable labeled "4."
[* black] Lift the dock connector assembly up and out of the iPhone.
[* icon_reminder] When inserting the new assembly, ensure the screw holes of the assembly rest ABOVE the bezel's holes
.
[* black] Insert wisdom hereRemove the following 3 screws:
[* red] Two 1.5 mm Phillips #00 screws, one on either side of the dock connector.
[* orange] One 2.4 mm Phillips #00 screw near the ribbon cable labeled "4."
[* black] Lift the dock connector assembly up and out of the iPhone.
[* icon_reminder] When inserting the new assembly, ensure the screw holes of the assembly rest ABOVE the bezel's holes
.

Imagem 1

Versão Antiga

Nova Versão