Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Josh Brown —

Edição aprovada por Josh Brown

Antes
Depois
Sem alteração

Linhas do passo

[* black] Slide the keyboard out.
-[* black] Use a Jimmy to separate a small segment of the plastic back housing and rest of the phone.
+[* black] Use a Jimmy to separate a small segment of the plastic back frame from rest of the phone.
[* icon_note] Starting at the bottom of the keyboard is recommended.
[* black] Slide an opening pick around the rest of the seam, starting at the gap just created with the Jimmy.
- [* icon_note] You will have to slide the keyboard back in to separate the back from the top have of the keyboard slider.
-[* black] Lift the back housing away.
+ [* icon_note] You will have to slide the keyboard back in to separate the back frame from the top have of the keyboard slider.
+[* black] Lift the plastic back frame away.