Ir para o conteúdo principal

Alterações no passo #2

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Insert the opening pick at an upward angle.
[* black] The plastic frame is glued to
in the display assembly. The following steps separatebattery-side edge of the phone, between the plastic frame from the display assembly.
[* icon_caution] It's very possible to accidentally destroy the LCD screen
and display, at this point. Be extremely careful separating these partsan upward angle.
[* black] Insert the opening pick at an upward angle.
[* black] The plastic frame is glued to
in the display assembly. The following steps separatebattery-side edge of the phone, between the plastic frame from the display assembly.
[* icon_caution] It's very possible to accidentally destroy the LCD screen
and display, at this point. Be extremely careful separating these partsan upward angle.
[* icon_note] When done correctly, you will see a gap between the display frame and the display assembly.
[* icon_caution] When done incorrectly, the pick will be visible through the glass. If this happens simply remove the pick and start again.

Imagem 1

Versão Antiga

Nova Versão

Imagem 2

Versão Antiga

Nova Versão