Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por Evan Noronha

Edição aprovada por Evan Noronha

Antes
Depois
Sem alteração

Linhas de Passo

[* blackicon_note] The following steps involve using opening picks to separate the display assembly from its plastic frame. Before beginning, read this [https://www.ifixit.com/Guide/Samsung+Galaxy+S6+Display+Assembly+Technique/45133|display assembly separation technique guide|new_window=true] to ensure you're not damaging the fused display.
[* icon_note
] Orient the phone so you are facing the back of the LCD faces youdisplay frame.
[* black] Insert an opening pick on the right side of the phone between the display assembly and plastic display frame.
[* icon_caution] Be sure to not angleOnly insert the pick downward, as this can cause the pick to separate the digitizer from the LCD. Rather, keep the pick angledat an upward angle to insert it between the plastic frame and the LCD.
[* icon_note] If you are unsure of the proper way to do this, follow our [https://www.ifixit.com/Guide/Samsung+Galaxy+S6+Display+Assembly+Technique/45133|technique guide] to ensure you're not
avoid separating the display assembly.
[* black] flip the phone over
LCD and check to see if the pick shows through the glass. If so, pull it out carefully and reinsert it higher angle. (in case we want to put this back in later)digitizer.
[* blackicon_note] The following steps involve using opening picks to separate the display assembly from its plastic frame. Before beginning, read this [https://www.ifixit.com/Guide/Samsung+Galaxy+S6+Display+Assembly+Technique/45133|display assembly separation technique guide|new_window=true] to ensure you're not damaging the fused display.
[* icon_note
] Orient the phone so you are facing the back of the LCD faces youdisplay frame.
[* black] Insert an opening pick on the right side of the phone between the display assembly and plastic display frame.
[* icon_caution] Be sure to not angleOnly insert the pick downward, as this can cause the pick to separate the digitizer from the LCD. Rather, keep the pick angledat an upward angle to insert it between the plastic frame and the LCD.
[* icon_note] If you are unsure of the proper way to do this, follow our [https://www.ifixit.com/Guide/Samsung+Galaxy+S6+Display+Assembly+Technique/45133|technique guide] to ensure you're not
avoid separating the display assembly.
[* black] flip the phone over
LCD and check to see if the pick shows through the glass. If so, pull it out carefully and reinsert it higher angle. (in case we want to put this back in later)digitizer.