Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por Dante Mazzanti

Edição aprovada por Dante Mazzanti

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Orient the phone so that the back of the LCD faces you.
[* black] Orient the phone so that the back of the LCD faces you.
[* black] Insert an opening pick between the display assembly and display frame.
[* icon_caution] Be sure to not angle the pick downward, as this can cause the pick to separate the digitizer from the LCD. Rather, keep the pick angled upward to insert it between the plastic frame and the LCD.
[* icon_note] ToIf you are unsure of the proper way to do this, follow our [https://www.ifixit.com/Guide/Samsung+Galaxy+S6+Display+Assembly+Technique/45133|technique guide] to ensure you're not separating the display assembly,assembly.
[* black]
flip the phone over and check to see if the pick shows through the glass. If so, pull it out carefully and reinsert it higher angle. (in case we want to put this back in later)
[* icon_note] ToIf you are unsure of the proper way to do this, follow our [https://www.ifixit.com/Guide/Samsung+Galaxy+S6+Display+Assembly+Technique/45133|technique guide] to ensure you're not separating the display assembly,assembly.
[* black]
flip the phone over and check to see if the pick shows through the glass. If so, pull it out carefully and reinsert it higher angle. (in case we want to put this back in later)