Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #3

Edição por Evan Noronha

Edição aprovada por Evan Noronha

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Orient the phone so that you're facing the back of the LCDLCD faces you.
[* black] Orient the phone so that you're facing the back of the LCDLCD faces you.
[* black] Insert an opening pick between the display assembly and display frame.
[* icon_caution] Be sure to not angle the pick downward, as this can cause the pick to separate the digitizer from the LCD. Rather, keep the pick as level as possibleangled upward to insert it between the plastic frame and the LCD.
[* icon_note] To ensure you're not separating the display assembly, flip the phone over and check if you canto see if the pick shows through the glass. If so, pull it out carefully and reinsert it flatterhigher angle.
[* icon_caution] Be sure to not angle the pick downward, as this can cause the pick to separate the digitizer from the LCD. Rather, keep the pick as level as possibleangled upward to insert it between the plastic frame and the LCD.
[* icon_note] To ensure you're not separating the display assembly, flip the phone over and check if you canto see if the pick shows through the glass. If so, pull it out carefully and reinsert it flatterhigher angle.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado