Pular para o conteúdo principal

Alterações no passo #1

Edição por Adam O'Camb

Edição aprovada por Adam O'Camb

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Insert a plastic opening pick between the case and the battery.
[* icon_caution] Be careful to keep the pick as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals.
[* black] Push the pick further in to separate the battery from the phone.
[* icon_noteblack] If the battery is too strongly adhered for the opening pick, place a warm iOpener[guide|25705|warm iOpener|new_window=true] over the battery to loosen the adhesive.
[* black] Alternatively, apply some isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken
the adhesive.
[* icon_noteblack] If the battery is too strongly adhered for the opening pick, place a warm iOpener[guide|25705|warm iOpener|new_window=true] over the battery to loosen the adhesive.
[* black] Alternatively, apply some isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken
the adhesive.
[* icon_caution] Do not pry against the motherboard or you may damage the phone.