Alterações no passo nº 1
Edição por Adam O'Camb —
Edição aprovada por Adam O'Camb
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_note] Place the phone facedown. | |
| [* icon_note] If your glass is shattered, put packing tape over the entire panel to hold it together during the removal process. | |
| [* black] Lay the iOpener over the panel for about 60 seconds to loosen the adhesive around the edge of the glass. | |
| [* black] Shift the iOpener to heat the remaining section of the panel for another 60 seconds. | |
| + | [* icon_caution] A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the OLED display and internal battery are both susceptible to heat damage. |