Pular para o conteúdo principal

Alterações no passo #5

Edição por Miroslav Djuric

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Working from the edge opposite the battery connectors, insert a spudger between the battery and the plastic frame and pry up on the battery. It is attached to the casing with an adhesive, but should slowly come free.
[* icon_caution] Leave the battery resting slightly out of its housing, but be sure not to put too much pressure on the battery wires as the solder joints break easily.

Imagem 1

Nenhuma imagem anterior

Adicionado