Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #12

Edição por Andrew Logan

Edição aprovada por Andrew Logan

Antes
Depois
Sem alteração

Linhas de Passo

[* black] Flip up the small circuit board, theUse pry tool to lift LCD
[* icon_note]
LCD should also unfold out of the camera, as picturedbe attached to ribbon cable.
[* black] Flip the black retaining clip up (pointed to with an arrow), and disengage the ribbon cable (Red Square).
[* icon_reminder]
Be careful to not damage the cable.
[* black] Gently pull ribbon cable to remove.
[* black] Flip up the small circuit board, theUse pry tool to lift LCD
[* icon_note]
LCD should also unfold out of the camera, as picturedbe attached to ribbon cable.
[* black] Flip the black retaining clip up (pointed to with an arrow), and disengage the ribbon cable (Red Square).
[* icon_reminder]
Be careful to not damage the cable.
[* black] Gently pull ribbon cable to remove.