Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Alterações no passo #10

Edição por Student4Life

Edição aprovada por Reed Crosby

Antes
Depois
Sem alteração

Linhas de Passo

[title] Install the battery
[* black] Select a lightweight adhesive. I used tacky glue.
[* black] Glue the battery into the compartment
[* black] Glue the battery controller board to the battery and position so that the ribbon cable is aligned with the connector. I used a large rubber band (or sponge) between the power controller board and the mother board to temporarily hold position while the glue dried.
[* black] Glue the extra mass to the battery
[* black] Reconnect the battery cable to the mother board. Tilt the black lever up, slide the cable in, and tilt down firmly.
[* black] If you have succeeded, you'll be able to charge the battery while the glue dries.

Imagem 1

Nenhuma imagem anterior

Adicionado