Alterações no passo nº 5
Edição por Kelly Fitzgerald —
Edição aprovada por Kelly Fitzgerald
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] To detach the larger wire ribbon lift the release latch on the connector |
|---|---|
| + | [* red] To detach the larger wire ribbon, lift the release latch on the connector of the circuit board by lifting it up. Remove the wire ribbon with tweezers. |
| [* orange] Now remove the smaller wire ribbon by pulling on it firmly but gently. | |
| [* black] Use the curved tip tweezers to carefully remove the green circuit board out from under the two clips holding it in place. | |
| [* icon_caution] The wire ribbons are very delicate; be very cautious when detaching them! |