Ir para o conteúdo principal

Alterações no passo #3

Edição por Taryn Kelley

Edição aprovada por Taryn Kelley

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Cut the red and black wires connecting the speaker to the inside of the Jambox.
-[* icon_note] Do not cut too much of the wire from the Jambox, because the new speaker will need to be soldered to the same wire.
+[* black] Desolder the wires from the speaker terminal in the Jambox.
[* icon_reminder] Detach the round speaker from its square frame, and save the square frame for the replacement speaker.
+[* black] Place the new speaker in the square frame and solder the new speaker's wire to the terminal.
[* icon_caution] Use caution when operating a soldering iron due to extreme heat.

Imagem 1

Excluído

Imagem 2

Excluído