Ir para o conteúdo principal

Alterações no passo #8

Edição por latimer

Edição aprovada por Taylor Dixon

Antes
Depois
Sem alteração

Linhas de Passo

+[* black] If applicable, peel off the tab from the back of the new battery, exposing the adhesive.
[* black] Rotate the battery down into its slot, and press it into position.
[* icon_note] Press the battery down against the S1 to re-adhere it in place.
[* icon_note] Now is the best time to test powering on your watch—if it doesn't turn on, double check all three connectors and try again.