Ir para o conteúdo principal

Alterações no passo #6

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Roll the opening pick up along the side of the button side of the watch, gently pushing in to separate the adhesive and widening the gap as you go.
-[* icon_note] Remember not to push the pick in too far—rolling makes it easier to do this than dragging the tip to cut the adhesive.
+[* black] Roll the opening pick up the side of the button side of the watch, gently pushing in to separate the adhesive and widening the gap as you go.
+[* icon_note] Remember not to push the pick in too far—it's easier to avoid this by rolling the pick, rather than dragging a tip along.