Ir para o conteúdo principal

Alterações no passo #5

Edição por Sam Goldheart

Edição aprovada por Sam Goldheart

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Once you've opened the gap enough, insert the tip of a plastic opening tool and slide it along the bottom, to separate adhesive holding the screen to the case.
-[* icon_caution] Be careful not to insert the opening pick too far—only about 1/8" (~3 mm) is necessary.
+[* black] Once you've opened the gap enough, insert the tip of an opening pick under the glass.
+[* black] Slide the pick along the bottom edge to separate adhesive holding the screen to the case.
+[* icon_caution] Be careful not to insert the opening pick too far. Only about 1/8" ( about 3 mm) is necessary, any deeper and you may damage cables.