Skip to main content

Alterações no passo #19

Edição por Andrew Hillenius

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] This board is held in place by four standoffs. We used [product|IF145-024|needle-nosed pliers], but a [product|IF145-009|5 mm nut driver] would be the ''right'' tool for the job.
[* black] Our friends at [http://www.adafruit.com/|Adafruit] have posted a [http://www.adafruit.com/blog/2010/11/04/the-open-kinect-project-the-ok-prize-get-1000-bounty-for-kinect-for-xbox-360-open-source-drivers/|$1,000http://www.adafruit.com/blog/2010/11/04/the-open-kinect-project-the-ok-prize-get-1000-bounty-for-kinect-for-xbox-360-open-source-drivers/|$2,000 bounty] for the first team to write an open source driver for Kinect. The Wiimote has been tremendously useful for our hobby robotics projects, and the Kinect's advanced sensors could really jump-start robotics research.
[* black] Our friends at [http://www.adafruit.com/|Adafruit] have posted a [http://www.adafruit.com/blog/2010/11/04/the-open-kinect-project-the-ok-prize-get-1000-bounty-for-kinect-for-xbox-360-open-source-drivers/|$1,000http://www.adafruit.com/blog/2010/11/04/the-open-kinect-project-the-ok-prize-get-1000-bounty-for-kinect-for-xbox-360-open-source-drivers/|$2,000 bounty] for the first team to write an open source driver for Kinect. The Wiimote has been tremendously useful for our hobby robotics projects, and the Kinect's advanced sensors could really jump-start robotics research.