Conserte seus objetos Comunidade Loja

Alterações no passo nº 3

Edição por Ricky —

Edição aprovada por Ricky

Antes
Depois
Sem alteração

Linhas do passo

[* black] Turn the camera over so that the lens is facing you.
-[* red] Using the tweezers, gently lift the flap that is securing the ribbon cable to the camera body (see photo).
+[* red] Using the tweezers, gently lift the flap that is securing the ribbon cable to the motherboard.
[* black] Using the tweezers, remove the ribbon cable from its socket.
+[* icon_note] A spudger may also be used to remove the ribbon cable.