Ir para o conteúdo principal

Alterações no passo #1

Edição por Ricky

Edição aprovada por Ricky

Antes
Depois
Sem alteração

Linhas de Passo

-[* red] Locate and remove the 2 screws (3.2mm) found on the bottom side of the camera (see photo).
-[* red] Locate and remove the 2 screws (3.2mm) found on the side of the camera (see photo).
-[* red] Locate and remove the 2 screws (3.2mm) found on the side of the camera where the cable inputs are found (see photo).
-[* blue] Open the flap revealing the cable inputs (as shown in the photo) and remove the final screw (3.8mm) found inside.
-[* icon_note] After removing the final screw, the camera body cover will be loose.
+[* red] Locate and remove the 2 screws (3.2mm) found on the bottom side of the camera.
+[* orange] Locate and remove the 2 screws (3.2mm) found on the side of the camera.
+[* yellow] Locate and remove the 2 screws (3.2mm) found on the side of the camera where the terminals are.
+[* green] Open the flap revealing the cable inputs and remove the final screw (3.8mm) found inside.

Imagem 2

Versão Antiga

Nova Versão

Imagem 3

Versão Antiga

Nova Versão