Alterações no passo nº 6
Edição por Thomas Napert —
Edição aprovada por Thomas Napert
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Lift the battery lead bracket from its slot. | |
| [* orange] Use the PH 1 screwdriver to unscrew the two 0.7 cm screws that hold the 2.6 cm long brass bracket in place. | |
| [* green] Use tweezers to remove the brass bracket. | |
| + | [* icon_note] During reassembly, remember to keep the spring inside the main trigger and against the bracket that is visible in the second of the accompanying photos. |