Ir para o conteúdo principal

Alterações no passo #3

Edição por Kevin Bhasi

Edição aprovada por Kevin Bhasi

Antes
Depois
Sem alteração

Linhas de Passo

-[* black] Carefully lift up the front left and right corners, then you will need to use a small plastic opening tool to lift 2 clips on the front. The palmrest should flip open and rest over the keyboard.
-[* black] If you have a N410c, skip this point and go on to the next one. If you have a N400c, disconnect the ribbon cable that connects the trackpoint to its buttons on the palmrest,
+[* light_blue] Carefully lift up the front left and right corners,
+[* green] then you will need to use a small plastic opening tool to lift 2 clips on the front. The palmrest should flip open and rest over the keyboard.
+[* red] If you have a N410c, skip this point and go on to the next one. If you have a N400c, disconnect the ribbon cable that connects the trackpoint to its buttons on the palmrest,
[* black] Lift the palmrest and then you can flip the keyboard over onto the screen, then you can see and disconnect the backup battery.

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado

Imagem 3

Nenhuma imagem anterior

Adicionado