Pular para o conteúdo principal

Alterações no passo #1

Edição por Andrew Nichols

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Remove the three screws (3.2mm) on the top of the drive and take off the top plate. Be careful, the casing is very flimsy.
[* black] Remove theThere is a 5.6mm screw in the lower case holding the disk drive in and pull it outin. Unscrew is to allow the drive to be removed.
[* black] Remove the three screws (3.2mm) on the top of the drive and take off the top plate. Be careful, the casing is very flimsy.
[* black] Remove theThere is a 5.6mm screw in the lower case holding the disk drive in and pull it outin. Unscrew is to allow the drive to be removed.