Pular para o conteúdo principal

Alterações no passo #1

Edição por Luke Reilly

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Remove the three 3.2mm screws (3.2mm) on the top of the drive and take off the top plate. Be careful, the casing is very flimsy.
[* black] There is a 5.6mm screw in the lower case holdingicon_note] At this point you can remove the entire drive in. Unscrew is to allowhave it replaced, or continue on with this guide to disassemble the optical drive to be removed.itself
[* black] Remove the three 3.2mm screws (3.2mm) on the top of the drive and take off the top plate. Be careful, the casing is very flimsy.
[* black] There is a 5.6mm screw in the lower case holdingicon_note] At this point you can remove the entire drive in. Unscrew is to allowhave it replaced, or continue on with this guide to disassemble the optical drive to be removed.itself

Imagem 1

Versão Antiga

Nova Versão