Pular para o conteúdo principal

Alterações no passo #4

Edição por Andrew Bookholt

Aguardando aprovação

Excluído
Adicionado
Sem alteração

Linhas de Passo

[* black] Use your fingernail or the edge of a plastic opening tool to flip up the retaining flap on LED indicator ZIF connector.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, not'''not''' the socket itself.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, not'''not''' the socket itself.
[* black] After flipping up the locking tab on the socket, use your fingers or a pair of tweezers to gently pull the cable straight out of its socket.
[* icon_note] If necessary, transfer the power board ribbon cable to your new power board.